San Ysidro Scrap Metal Recycling & HVAC Refrigerant Recovery

Serving San Ysidro Scrap Metal Sellers and Contractors

C4S Recycling buys ferrous and non-ferrous scrap metal from San Ysidro residents, HVAC contractors, and property managers, and the most practical way to work with us from this part of San Diego is a roll-off container or a scheduled pickup rather than a special trip. We’re about 30-35 minutes from the San Ysidro Port of Entry and the San Ysidro Transit Center via SR-94/I-805/I-5, so we set up containers on-site and run scheduled routes for jobs with steady volume. Walk-in drop-off at our El Cajon yard is still available for anyone willing to make the drive, with same-day cash on a certified scale.

Scrap Metal and HVAC Recycling Services for San Ysidro

Our services cover most of what a border-zone commercial corridor and a dense residential neighborhood produce in scrap:

• Copper, aluminum, brass, steel, and insulated wire buying, weighed on a certified scale with same-day cash payment
• EPA-compliant AC unit and chiller refrigerant recovery, with documentation HVAC and mechanical contractors can keep on file — see our guide on recycling an old AC unit or chiller
• Roll-off containers and scheduled pickup with net-terms billing for commercial accounts, GCs, and property managers
• Demolition and construction debris recycling tied to C4S Demolition’s job-site work
• Commercial cleanouts and storage for property managers and general contractors clearing out units or storefronts

Not sure whether a load is ferrous or non-ferrous, or what it’s worth? Our ferrous vs. non-ferrous metal guide breaks down what we accept and how pricing works.

Local Landmarks and Scrap Recycling Near San Ysidro

San Ysidro (zip code 92173) sits right at the U.S.-Mexico border, anchored by the San Ysidro Port of Entry, the busiest land border crossing in the Western Hemisphere, and the San Ysidro Transit Center where the trolley line ends. That crossing pulls constant commercial and cross-border traffic through the dense corridor of shops and service businesses near the border, which turns over inventory and equipment often enough to generate a steady stream of scrap metal.

The neighborhood’s older residential blocks add to that supply, since homes and apartment buildings here often have original copper wiring and plumbing pulled during renovations. We also work with businesses and contractors out toward Otay Mesa and Imperial Beach, and while Tijuana sits just across the border, it’s outside our service area.

Older Housing Rewires and Border-Corridor Commercial Scrap

San Ysidro’s building stock skews older and denser than a lot of South Bay neighborhoods, so electricians and plumbers working here run into a lot of legacy copper wiring and old plumbing lines during upgrades. That copper is worth pulling and recycling rather than tossing in a dumpster, and knowing what you’re holding, romex versus bare bright versus insulated wire, changes what it pays out. Our guide to how scrap metal pricing works covers how grade and purity affect payout so contractors can estimate value before hauling material in.

The commercial side matters too. Retail and light-industrial businesses clustered near the port of entry turn over fixtures, HVAC equipment, and metal stock more often than a typical suburban strip, and that volume is usually better handled with a scheduled pickup or an on-site container than repeated trips to El Cajon.

Why San Ysidro Contractors Trust C4S Recycling

C4S Recycling is the sister brand to C4S Demolition, a family-run El Cajon business with more than 20 years serving San Diego County, not a corporate scrap chain that changes hands every few years. Our scale is certified for accurate weigh-ins, our refrigerant recovery is EPA-compliant with paperwork you can hand to an inspector or a client, and payment is same-day cash.

We’ll be straight with you: the drive from San Ysidro to our yard at 1354 N Magnolia Ave in El Cajon is about 30-35 minutes via SR-94/I-805/I-5, and that’s not a quick errand. That’s exactly why we lean on roll-off containers and scheduled pickup for San Ysidro accounts. Instead of a contractor or property manager burning an hour-plus round trip, we bring the container to the job site or run a route on a schedule that fits the work, with the same certified weigh-ins and documented recovery, the same setup we’ve run for 20-plus years.

What to Expect: The C4S Recycling Process

For San Ysidro jobs, most accounts start with a container or pickup request. Call 760-521-9066, tell us the material type and roughly how much volume you’re generating, and we’ll schedule a roll-off container drop or a recurring pickup route, with net-terms billing for commercial accounts. When the container’s full or the pickup date arrives, we haul it to El Cajon, weigh it on our certified scale, and settle up per your account terms.

If you’d rather handle it yourself, walk-in drop-off is open with no appointment needed. Load up your vehicle, make the drive to 1354 N Magnolia Ave, and we’ll weigh your material on the same certified scale and pay same-day cash on the spot. Either way, refrigerant from AC units and chillers gets EPA-compliant recovery with documentation.

Frequently Asked Questions About Scrap Recycling in San Ysidro

Do you actually offer pickup for San Ysidro, given how far it is from El Cajon?

Yes. Because the drive is about 30-35 minutes each way via SR-94/I-805/I-5, we push commercial accounts and contractors in San Ysidro toward roll-off containers and scheduled pickup rather than expecting repeat walk-in trips. Call 760-521-9066 to set up a container or a route.

Can HVAC contractors near the San Ysidro Port of Entry get refrigerant recovery documentation?

Yes. Our EPA-compliant AC unit and chiller refrigerant recovery comes with paperwork you can keep on file or hand to a client or inspector, whether the unit comes from a job near the border crossing or anywhere else in San Ysidro.

What kind of scrap metal is most common from San Ysidro’s older housing stock?

We see a lot of copper wiring and copper or galvanized plumbing pulled during renovations in San Ysidro’s older buildings, plus steel and aluminum from general upgrades. It all gets weighed on our certified scale and paid same-day cash.

Do you set up containers for property managers and GCs doing cleanouts in San Ysidro?

Yes. We provide roll-off containers and scheduled pickup with net-terms billing for property managers and general contractors handling cleanouts or demolition debris near the border corridor, so material doesn’t have to be hauled to El Cajon load by load.

Schedule Scrap Pickup or Drop-Off in San Ysidro

Whether you’re an HVAC contractor near the port of entry, a property manager clearing out units, or a resident with a truck bed of old wiring and pipe, C4S Recycling can work with the distance from San Ysidro to El Cajon instead of making it your problem. Set up a roll-off container or a scheduled pickup, or plan a walk-in drop-off on your own schedule.

View All Service Areas